10 Best High Performance Ignition Coil Reviews & Guide in 2022

Best High Performance Ignition Coil

In the world of small-block Chevy performance, there are a lot of different ignition systems and philosophies. However, there is no debate that a high-performance ignition coil should be part of every engine build.

A coil provides spark to an engine’s plug when it receives current from the distributor cap or rotor. The design of a coil determines how efficiently it can produce that spark and how much voltage it can handle before it overheats and fails.

Coils come in two types: high-output and standard. A standard coil produces between 8,000 and 10,000 volts at idle speed and has a maximum capacity of 20,000 volts at wide-open throttle (WOT). An all-motor drag race application would likely use a common low-impedance design, while a street/strip car needs more voltage to run big nitrous or blower applications.

If you’re building a high-horsepower small-block Chevy, then you want to use high-output coils on your distributor cap. These coils produce 12V output at idle speed, which is more than enough for most street engines running stock components. They also have higher amperage ratings than their low-impedance counterparts so they can deliver more juice.

1.Megaflint Ignition Coil

Features

  • Brand : ‎Megaflint
  • Item Weight : ‎4.09 pounds
  • Package Dimensions : ‎14.5 x 11 x 2 inches
  • Is Discontinued By Manufacturer : ‎No

This is a Megaflint Ignition Coil. This is a high quality, direct fit replacement for your 1998 to 2008 4.6L 5.4L or 6.8L 2 valve modular engines. This coil has been manufactured with the highest standards and has been engineered specifically for 1998 to 2008 4.6L 5.4L or 6.8L 2 valve modular engines.

This ignition coil features OE standard performance & durability TS16949 Certified Manufacturer, it has 15% more enegy than OE coils. It is a direct replacement of your original equipment (OE) coil which means it will install just as easily as the original did when you installed it on your vehicle, so there’s no need to worry about modifications or special tools to install this part on your vehicle.

This part has been remanufactured to be 100% new and high quality auto parts at a fraction of the price of a genuine Ford part; that’s why we offer our 5 year warranty on all parts we sell, so you can buy with confidence knowing that your Ford part was built right here in America!

2.AIP Electronics Dragon Fire High Performance Ignition Coil Pack Compatible

Features

  • Brand : ‎AIP Electronics
  • Item Weight : ‎2.4 pounds
  • Product Dimensions : ‎12 x 3 x 12 inches
  • Item model number : ‎C189-DF
  • Manufacturer Part Number : C189-DF
  • OEM Part Number : ‎4609103, 4609103AB, 4609103AC, 56032521, 5269670, 5269670AB, 56032521AB, 56032521AC, 12137510738, M04609103AB, M04557468, M05269670, MD52696760, MO4557468, MO477667, MO4777667, E504A, UF106, UF183, UF410, UF189, UF403, UF410, GN10142

AIP Electronics is proud to present our newest line of high performance ignition coils for the Chrysler Dodge Eagle Jeep Mini Mitsubishi Plymouth I4 V10 1.6L 2.0L 2.4L 8.0L 8.3L 3 Pin Flat Be Sure to Check for Correct Fitment Using the Chart Above. Don’t See a Chart? Message us for help.

Compatible with 1996-2008 Chrysler Dodge Eagle Jeep Mini Mitsubishi and Plymouth I4 V10 1.6L 2.0L 2.4L 8.0L 8.3L 3 Pin Flat Be Sure to Check for Correct Fitment Using the Chart Above. Don’t See a Chart? Message us for help.

Engineered to provide reliable, complete combustion. Watertight, weatherproof connector designed using advance thermoplastics to resist fracture and cracking from heat and thermal cycling, tested and ensured to meet or exceed OE output voltage, high-temp exterior housing construction to prevent voltage leaks and RFI interference, Performance grade primary & secondary bobbins with premium copper windings to ensure peak performance under load and extended service life.

3.B4B BANG 4 BUCK DG508 8 Pack Ignition Coils

Features

  • Brand : ‎B4B BANG 4 BUCK
  • Item Weight : ‎3.3 pounds
  • Package Dimensions : ‎10.28 x 7.4 x 2.32 inches
  • Is Discontinued By Manufacturer : No
  • Manufacturer Part Number : BB-10202011B

This is a high-quality choice: the product is made of high-grade materials, even under extreme conditions that is extremely durable.

Good ignition performance: providing high electrical resistance, strongspark from plugs, and being resistant to corrosion and abrasion.

Compatible part numbers: DG508,DG457,DG472,DG491,F523,,F7TU-12A366AB,, F7TU-2A366BA, F7TZ-012029BA, F7TZ-1029CC F7TZ-1029CC,F7TZ-12029AB,FZTZ-12029CA I2LU-12A388-AA , IL-2Z-12029-AA ,

pls kindly remove the fuel rails by simply unbolting the two bolts on the top, then pls kindly gently pull it up. 2. pls remove the connectors or bolts from the ignition coils in a numerical order; pls repeat this step for each coil. 3. pls kindly replace the whole coils instead of the bad one coil to avoid malfunctions.

4.Megaflint High Performance Ignition Coil 8 Pack

Features

  • Brand : ‎Megaflint
  • Item Weight : 3.58 pounds
  • Package Dimensions : ‎14.61 x 11.1 x 2.05 inches
  • Is Discontinued By Manufacturer : ‎No

If your vehicle is equipped with an electronic ignition system, you may have noticed that your engine does not start as easily as it used to. The reason for this is the ignition coil.

Ignition coils work by converting high voltage from your car battery into low voltage that is used to ignite the air/fuel mixture in your engine’s cylinders. High voltage from the battery flows through a wire winding inside the ignition coil which generates a spark at its tip when it reaches a certain amount of current flow.

If your ignition coil fails, it will create misfires in your engine’s cylinders because there will not be enough energy produced to ignite the air/fuel mixture. This can cause damage to your catalytic converter, excessive fuel consumption and poor performance of your motor vehicle.

5.AIP Electronics DRAGON FIRE PERFORMANCE Ignition Coil Relocation Connector Harness Set Compatible

Features

  • Brand : ‎AIP Electronics
  • Item Weight : ‎8.4 ounces
  • Package Dimensions : ‎4.45 x 3.98 x 3.78 inches
  • Item model number : ‎WH1076x2

Dragon Fire Performance Ignition Coil Relocation Connector Harness Set is designed to relocate your ignition coil on LS engines. These connectors are used for LS engines with the D580 ignition coils. This connector will allow you to relocate your ignition coil for better performance, clearance and heat management.

These connectors have been tested and ensured to match original OE fit and function. These connectors are direct factory fit and ready for installation straight out of the box.

The connector is made from premium grade materials and designed to withstand thermal cycling, tested and ensured to match OE fit and function. No cutting or splicing required! Just plug it in!

Dragon Fire Performance Ignition Coil Relocation Connector Harness Set Compatible with LQ9 LQ4 LS2 LS3 LS7 LSX 4.8 5.3 6.0 6.2 7.0 Truck, SUV, Car Applications (Does not fit D580 LS1 Coils) Be Sure to Check for Correct Fitment Using the Chart Above.

6.BDFHYK High Performance Ignition Coil DG508 Set

Features

  • Brand : BDFHYK
  • Item Weight : 3.34 pounds
  • Package Dimensions : ‎8.54 x 7.56 x 2.95 inches

We have thousands of ignition coils for most of the vehicles on the road today. It is one of the most common replaced parts. Ignition coils are designed to produce high voltage for the spark plugs to ignite the air/fuel mixture in the engine.

Ignition coils have a high failure rate due to the heat and harsh environment that they are exposed to, causing them not to function properly or even fail completely. When this happens, it causes a misfire condition which can result in poor fuel economy and acceleration problems.

If you are experiencing any of these symptoms it may be time to replace your ignition coil pack.

The ignition coil pack consists of one or more ignition coils that are housed in an aluminum case with a plastic cover.

The electrical current flows through each individual coil, producing a large voltage output which then travels through the distributor cap & rotor and into each spark plug wire where it jumps across the gap inside the spark plug itself creating sparks that ignite your fuel/air mixture creating combustion within your engine which is what makes your car go!

7.MOSTPLUS Ignition Coils Compatible for 2003-2011

Features

  • Brand : ‎MOSTPLUS
  • Item Weight : ‎2.35 pounds
  • Package Dimensions : ‎8.43 x 5.35 x 4.09 inches
  • Item model number : ‎M18531WX4
  • Is Discontinued By Manufacturer : ‎No
  • Manufacturer Part Number : ‎M18531WX4

Ignition Coils are one of the most important parts of your car’s ignition system. They convert the 12 volt power from the battery into 35,000 or more volts. This massive surge of electricity is sent to each spark plug in your engine. The spark plugs then create a small explosion which ignites the air/fuel mixture and powers the engine.

The most common failure with ignition coils is a shorted winding which will not allow current to flow through the coil. If this happens, you will notice your car misfiring and possibly stalling out. Another common problem is corrosion on the terminals which can prevent proper electrical connection to the spark plugs and cause a no-start condition.

To keep your Saab running at peak performance, it’s important to replace any faulty ignition coils with new ones as soon as possible. The longer you wait, the higher chance there is that other components in your ignition system may be damaged due to insufficient voltage delivery from an underperforming coil pack (such as fuel injectors).

8.DRAGON FIRE PERFORMANCE Ignition Coil Pack Compatible

Features

  • Brand : ‎AIP Electronics
  • Item Weight : ‎2.45 pounds
  • Package Dimensions : ‎14.09 x 6.54 x 2.44 inches
  • Manufacturer Part Number : ‎C669-DF

If you own a Buick, Chevrolet, Cadillac or GMC and are looking for a replacement coil pack to increase your vehicle’s performance, look no further than Dragon Fire Performance. We carry a wide variety of ignition coils that will fit your vehicle perfectly.

Our coils feature a watertight, weatherproof connector designed using advance thermoplastics to resist fracture and cracking from heat and thermal cycling, tested and ensured to meet and exceed OE output voltage, high-temp exterior housing construction to prevent voltage leaks and RFI interference, performance grade primary & secondary bobbins with premium copper windings to ensure peak performance under load and extended service life.

We also offer an exclusive lifetime warranty on all our ignition coils! If you’re looking for the best replacement coil packs on the market today then look no further than Dragon Fire Performance!

9.PerTronix 40011 Flame-Thrower 40,000 Volt 1.5 ohm Coil

Features

  • Brand : Pertronix
  • Item Dimensions LxWxH : 8.3 x 3.4 x 2.5 inches
  • Item Weight : 1.52 Pounds

The PerTronix 40011 Flame-Thrower 40,000 volt coil is an inductive ignition system for use on modern cars with electronic ignitions. This coil uses a 3 terminal design that is compatible with most electronic ignitions. This unit has a 1.5 ohm primary resistance value and a secondary resistance of 40,000 volts. The coil is available in chrome plated or black for that stock look. This unit is legal in all 50 states and Canada (CARB EO #D-57-21).

This coil has been designed to work with inductive ignition systems such as those found on many modern cars and trucks. These coils are commonly used to replace the OEM coils found in vehicles such as Ford, Dodge, GMC, Hummer and Chevy trucks. They also work well on most Japanese imports such as Toyota, Nissan and Honda vehicles.

The PerTronix 40011 Flame-Thrower 40,000 Volt 1.5 ohm Coil is ideal for use with any induction type ignition system that requires a 3 terminal configuration.

10.MSD 8202 Blaster 2 Hi-Performance Coil

Features

  • Brand : MSD
  • Item Dimensions LxWxH : 0.9 x 0.7 x 0.7 inches
  • Item Weight : 580 Grams

The MSD 8202 Blaster 2 Hi-Performance Coil is an excellent choice for a performance ignition coil that will work with any type of ignition system. This coil features a dual-fire design and can be used on applications up to 10,000 rpm. The MSD 8202 Blaster 2 Hi-Performance Coil is designed and manufactured in the United States and comes with a one year warranty from the manufacturer.

The MSD 8202 Blaster 2 Hi-Performance Coil has been tested to ensure optimal performance and meets or exceeds all factory specifications. This coil provides superior spark energy which helps improve throttle response and overall engine performance. The MSD 8202 Blaster 2 Hi-Performance Coil also features a durable ceramic insulator which means it will last longer than other types of coils.

The MSD 8202 Blaster 2 Hi-Performance Coil has been tested to ensure optimal performance and meets or exceeds all factory specifications. This coil provides superior spark energy which helps improve throttle response and overall engine performance. The MSD 8202 Blaster 2 Hi-Performance Coil also features a durable ceramic insulator which means it will last longer than other types of coils.

Things to consider before buying a best high performance ignition coil

Price

The price of the coil is not a deal breaker, but it’s still important. I would say that price is somewhere in the middle of the factors that you should consider, although it depends on how much you can afford to spend on your new ignition coil. The best high performance ignition coils are usually more expensive than those with lower performance. However, there are some cheap options out there that will perform just as well as their more expensive counterparts.

If you’re someone who wants to save money and doesn’t care about having an extremely powerful ignition coil then this isn’t going to be an issue for you; however if money isn’t an issue and performance is something that matters then go ahead and get one of these bad boys because they’ll definitely make sure your car runs smoothly!

Quality

When shopping for a high performance ignition coil, you will want to make sure that it is made of quality materials. In addition to the material, you should also check on the manufacturer and warranty. The reviews from other consumers are also very important as well.

To ensure that you are getting a good product, read some reviews from previous buyers and get their recommendations before purchasing your new product.

Compatibility

  • Check compatibility of the coil with your vehicle.
  • Check compatibility of the coil with your ECU.
  • Check compatibility of the coil with your spark plugs.

Warranty

The warranty is a good indicator of the quality of the product. A decent warranty will show that the manufacturer has confidence in their product as it will be guaranteed for a certain period of time. Some manufacturers also offer an extended warranty and this should be taken into consideration when choosing your coil.

Conclusion

In the end, there’s no one best ignition coil for everyone. Instead, you have to find the one that best suits your needs.

If you’re a novice and looking for a high performance ignition coil to get started in the world of racing and marine engines, then we recommend buying one with a popular brand name like OEM part numbers or OE replacements. These are usually cheaper than other alternatives and provide good value for money because they’re designed to work perfectly within their parameters while being affordable at the same time. If this sounds like something that would benefit you, then look out for this type when shopping around online or offline at local stores in your area!

We hope that this article has helped you think about what is important when considering the different options and made your decision a little easier.

Leave a Reply

Your email address will not be published.